• Home
  • R&D
    • Deep Drilling
    • Oil and Gas
          • PURE-BORE®
            INHIBITORS
            ENCAPSULATORS
            LUBRICANTS/ROP
            ENHANCERS
            LCMs
            LOW INVASION ADDITIVES
            BREAKERS
            TEMPERATURE STABILISERS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Oil & Gas

            Performance products which can be formulated to deliver highly effective, ecological solutions for specific applications.

    • Geothermal
          • PURE-BORE®
            INHIBITORS
            ENCAPSULATORS
            LUBRICANTS/ROP
            ENHANCERS
            LCMs
            LOW INVASION ADDITIVES
            BREAKERS
            TEMPERATURE STABILISERS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Geothermal

            Performance products which can be formulated to deliver highly effective, ecological solutions for specific hole sections, formations and applications.

    • Carbon Storage
          • PURE-BORE®
            INHIBITORS
            ENCAPSULATORS
            LUBRICANTS/ROP
            ENHANCERS
            LCMs
            LOW INVASION ADDITIVES
            BREAKERS
            TEMPERATURE STABILISERS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Carbon Storage

            Performance products which can be formulated to deliver highly effective, ecological solutions for specific hole sections, formations and applications.

  • - Oil and Gas
  • - Geothermal
  • - Carbon Storage
  • - Nuclear Storage
    • Industrial Products
    • Geotechnical
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Geotechnical

            Performance products which can be formulated to deliver highly effective and ecological solutions for specific formations and applications.

    • Geothermal
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Geothermal

            Performance products which can be formulated to deliver highly effective and ecological solutions for the cost effective drilling of Geothermal boreholes.

    • Water Well
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Water Well

            Performance products which can be formulated to deliver highly effective and ecological solutions for the drilling of water wells.

    • Mining
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Mining

            Performance products which can be formulated to deliver highly effective and ecological solutions for the drilling of mineral exploration boreholes.

    • HDD
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • HDD

            Performance products which can be formulated to deliver highly effective and ecological solutions for HDD projects.

    • Foundations
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Foundations

            Performance products which can be formulated to deliver highly effective and ecological solutions for slurry wall and bored piling applications.

    • Tunnelling
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Tunnelling

            Performance products which can be formulated to deliver highly effective and ecological solutions in both tunnelling and micro tunnelling applications.

    • Civil Engineering
          • PURE-BORE®
            BENTONITE PRODUCTS
            GROUTS AND SEALANTS LUBRICANTS
            POLYMERS AND LCMs
            FOAMS
            COMMODITY CHEMICALS
            LABORATORY SERVICE

          • Civil Engineering

            Performance products which can be formulated to deliver highly effective and ecological solutions for civil engineering applications.

  • - Geotechnical
  • - Geothermal
  • - Water Well
  • - Mining
  • - HDD
  • - Foundations
  • - Tunnelling
  • - Civil Engineering
  • Case Studies
  • Environmental
  • Blog
  • Contact
 

OIL & GAS

Performance products which can be formulated to deliver highly effective, ecological solutions for specific applications.

Click or tap the ‘hotspots’ below to find out how our products support you at every stage of your project.

\

Top Hole Solutions (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of surface drilling by minimising product consumption, reducing cuttings waste volume and increasing water recycling. Pure-Bore® product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation. Bio-degradable Pure-Bore® products substitute for large volumes of mineral products and synthetic polymers which are prevented from environmental release or accumulating in landfills. The water table is protected by Pure-Bore® as one of a small number of products allowed to be in contact with drinking water sources in the UK and EU.

\

Intermediate Hole Section (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of overburden drilling by minimising product consumption, cuttings waste volume and increasing water use efficiency. With de-watering and screening solids control equipment, re-use efficiencies of up to 75% have been achieved on land wells in mainland Europe. Bio-degradable, non-toxic product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation while increasing hydraulic efficiency. Significant volumes of mineral products and synthetic polymers are replaced with reusable brines and just two bio-degradable polymers. Pure-Bore® is ideally suited to drilling mud formulations that can be safely biodegraded by land farming techniques, preventing landfill accumulation. High performance Pure-Bore® fluids with shale stabilisers further reduce environmental impact and carbon footprint when they are employed to replace the historical use of Oil-Based Muds.

\

Reservoir Completion Fluid Solutions (onshore)

It has been observed in the oil industry that long-chain polymers such as xanthan gums and poly acrylamides reduce the frictional pressure drop in narrow pipes such as coil tubing. This is used to advantage by completion operators when pumping solids free fluids through smaller diameters such as coil tubing. Pure-Bore® products have similar and in many cases superior effects on reducing pressure loss in turbulent flow and therefore surface pumping pressure. As well as pressure loss reduction, Pure-Bore® products provide chloride, cement and calcium resistance as well as stable rheology properties up to 140°C when combined within formate brine bases. Such properties are maintained while the fluids remain fully bio-degradable and non-toxic.

\

Reservoir Drilling Fluid Solutions (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of reservoir drilling by minimising product consumption, replacing single use fluids and increasing hydraulic efficiency of slim hole drilling. The reservoir pressure and temperature application ranges from normal hydrostatic to 1.8 sg equivalent and 140°C when Pure-Bore® products are used in chlorides, bromides and mixed formate brines. The makeup of Pure-Bore® reservoir products enhances the effects of enzyme-based filter cake breakers, allowing higher return permeabilities and production in open hole and gravel packed completions. This produces more hydrocarbons for lower capital expenditure which saves on resources which can be re-assigned to social and economic infrastructure.

\

Top Hole Solutions (offshore)

Pure-Bore® drilling fluids reduce the environmental impact of surface drilling by minimising the volume and tonnage of products discharged offshore. Pure-Bore® based PLONOR product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation. In combination with chloride brines, Pure-Bore® replaces the functional use of mined mineral products. This reduces the volume of cuttings pile plumes which can impact on the habitat of fragile seabed fauna.

\

Intermediate Hole Section (offshore)

High Performance Pure-Bore® drilling fluids reduce the carbon footprint of overburden drilling by minimising product consumption and eliminating the environmental risks of handling bulk mineral oil-based mud and cuttings offshore. The adverse impacts of discharging synthetic hydrocarbon-based drilling fluids in deep sea waters can be eliminated by the substitution of hydrate inhibited Pure-Bore® fluids. Significant volumes of mined mineral products and synthetic polymers are replaced with reusable brines and just two bio-degradable products. Bio-degradable, non-toxic product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation while increasing hydraulic efficiency.

\

Reservoir Completion Fluid Solutions (offshore)

It has been observed in the oil industry that long-chain polymers such as xanthan gums and poly acrylamides reduce the frictional pressure drop in narrow pipes such as coil tubing. This is used to advantage by completion operators when pumping solids free fluids through smaller diameters such as coil tubing. Pure-Bore® products have similar and in many cases superior effects on reducing pressure loss in turbulent flow and therefore surface pumping pressure. As well as pressure loss reduction, Pure-Bore® products provide chloride, cement and calcium resistance as well as stable rheology properties up to 140°C when combined within formate brine bases. Such properties are maintained while the fluids remain fully bio-degradable and non-toxic.

\

Reservoir Drilling Fluid Solutions (offshore)

Pure-Bore® drilling fluids reduce the carbon footprint of reservoir drilling by minimising product consumption, replacing single use fluids and increasing hydraulic efficiency of slim hole drilling. The reservoir pressure and temperature application ranges from normal hydrostatic to 1.8 sg equivalent and 140°C when Pure-Bore® products are used in chlorides, bromides and mixed formate brines. The makeup of Pure-Bore® reservoir products enhances the effects of enzyme-based filter cake breakers, allowing higher return permeabilities and production in open hole and gravel packed completions. This produces more hydrocarbons for lower capital expenditure which saves on resources which can be re-assigned to social and economic infrastructure.

Top Hole Solutions (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of surface drilling by minimising product consumption, reducing cuttings waste volume and increasing water recycling. Pure-Bore® product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation. Bio-degradable Pure-Bore® products substitute for large volumes of mineral products and synthetic polymers which are prevented from environmental release or accumulating in landfills. The water table is protected by Pure-Bore® as one of a small number of products allowed to be in contact with drinking water sources in the UK and EU.

Intermediate Hole Section (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of overburden drilling by minimising product consumption, cuttings waste volume and increasing water use efficiency. With de-watering and screening solids control equipment, re-use efficiencies of up to 75% have been achieved on land wells in mainland Europe. Bio-degradable, non-toxic product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation while increasing hydraulic efficiency. Significant volumes of mineral products and synthetic polymers are replaced with reusable brines and just two bio-degradable polymers. Pure-Bore® is ideally suited to drilling mud formulations that can be safely biodegraded by land farming techniques, preventing landfill accumulation. High performance Pure-Bore® fluids with shale stabilisers further reduce environmental impact and carbon footprint when they are employed to replace the historical use of Oil-Based Muds.

Reservoir Completion Fluid Solutions (onshore)

It has been observed in the oil industry that long-chain polymers such as xanthan gums and poly acrylamides reduce the frictional pressure drop in narrow pipes such as coil tubing. This is used to advantage by completion operators when pumping solids free fluids through smaller diameters such as coil tubing. Pure-Bore® products have similar and in many cases superior effects on reducing pressure loss in turbulent flow and therefore surface pumping pressure. As well as pressure loss reduction, Pure-Bore® products provide chloride, cement and calcium resistance as well as stable rheology properties up to 140°C when combined within formate brine bases. Such properties are maintained while the fluids remain fully bio-degradable and non-toxic.

Reservoir Drilling Fluid Solutions (onshore)

Pure-Bore® drilling fluids reduce the carbon footprint of reservoir drilling by minimising product consumption, replacing single use fluids and increasing hydraulic efficiency of slim hole drilling. The reservoir pressure and temperature application ranges from normal hydrostatic to 1.8 sg equivalent and 140°C when Pure-Bore® products are used in chlorides, bromides and mixed formate brines. The makeup of Pure-Bore® reservoir products enhances the effects of enzyme-based filter cake breakers, allowing higher return permeabilities and production in open hole and gravel packed completions. This produces more hydrocarbons for lower capital expenditure which saves on resources which can be re-assigned to social and economic infrastructure.

Top Hole Solutions (offshore)

Pure-Bore® drilling fluids reduce the environmental impact of surface drilling by minimising the volume and tonnage of products discharged offshore. Pure-Bore® based PLONOR product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation. In combination with chloride brines, Pure-Bore® replaces the functional use of mined mineral products. This reduces the volume of cuttings pile plumes which can impact on the habitat of fragile seabed fauna.

Intermediate Hole Section (offshore)

High Performance Pure-Bore® drilling fluids reduce the carbon footprint of overburden drilling by minimising product consumption and eliminating the environmental risks of handling bulk mineral oil-based mud and cuttings offshore. The adverse impacts of discharging synthetic hydrocarbon-based drilling fluids in deep sea waters can be eliminated by the substitution of hydrate inhibited Pure-Bore® fluids. Significant volumes of mined mineral products and synthetic polymers are replaced with reusable brines and just two bio-degradable products. Bio-degradable, non-toxic product solutions provide a combination of viscosity with encapsulation and wellbore stabilisation while increasing hydraulic efficiency.

Reservoir Completion Fluid Solutions (offshore)

It has been observed in the oil industry that long-chain polymers such as xanthan gums and poly acrylamides reduce the frictional pressure drop in narrow pipes such as coil tubing. This is used to advantage by completion operators when pumping solids free fluids through smaller diameters such as coil tubing. Pure-Bore® products have similar and in many cases superior effects on reducing pressure loss in turbulent flow and therefore surface pumping pressure. As well as pressure loss reduction, Pure-Bore® products provide chloride, cement and calcium resistance as well as stable rheology properties up to 140°C when combined within formate brine bases. Such properties are maintained while the fluids remain fully bio-degradable and non-toxic.

Reservoir Drilling Fluid Solutions (offshore)

Pure-Bore® drilling fluids reduce the carbon footprint of reservoir drilling by minimising product consumption, replacing single use fluids and increasing hydraulic efficiency of slim hole drilling. The reservoir pressure and temperature application ranges from normal hydrostatic to 1.8 sg equivalent and 140°C when Pure-Bore® products are used in chlorides, bromides and mixed formate brines. The makeup of Pure-Bore® reservoir products enhances the effects of enzyme-based filter cake breakers, allowing higher return permeabilities and production in open hole and gravel packed completions. This produces more hydrocarbons for lower capital expenditure which saves on resources which can be re-assigned to social and economic infrastructure.

Need some advice? Contact our experienced team for technical advice on the best product for your specific requirement:

Clear Solutions during the COVID-19 Pandemic

At Clear Solutions International Ltd, during the COVID-19 pandemic it is our priority to keep our employees, their families, customers, and suppliers safe and well. We closely monitor the pandemic situation by following local, national and international health authority guidelines and taking the appropriate measures.

Measures that we have implemented, include additional hygiene facilities for staff, maintaining social distancing within the factory and offices, enabling employees to work from home, avoiding group meetings and using online video conference call tools. These measures allow our teams to continue operations and to follow up with our customers and suppliers on a regular basis.

We continue to follow government guidance and will adapt our actions accordingly. This requires that we do some things differently, and we need to prioritise our activities so that we can continue to provide the services you need.

We value your support and ask for your patience.